perl-Device-PiLite - Interface to Ciseco Pi-Lite for Raspberry Pi

Property Value
Distribution ALT Linux Sisyphus
Repository Autoimports noarch
Package filename perl-Device-PiLite-0.01-alt1.noarch.rpm
Package name perl-Device-PiLite
Package version 0.01
Package release alt1
Package architecture noarch
Package type rpm
Category Development/Perl
Homepage -
License -
Maintainer -
Download size 23.41 KB
Installed size 23.41 KB
This module provides an interface for the Ciseco Pi-Lite for the Raspberry Pi.
The Pi-Lite has a 14 x 9 grid of LEDs controlled by an embedded ATMEL AVR
microcontroller that itself can be programmed using the Arduino toolchain,
however the default firmware provides a relatively simple mechanism to
communicate with the board from the Raspberry Pi's TTL serial port.
Device::PiLite requires the default firmware and will not work if the Pi-Lite
is loaded with some other sketch.


Package Version Architecture Repository
perl-Device-PiLite - - -


Name Value
/usr/share/perl5 -
perl(Device/ >= 1.040
perl( >= 2.100.500
perl(Scalar/ -
rpmlib(PayloadIsLzma) -


Name Value
perl(Device/ = 0.010
perl-Device-PiLite = 0.01-alt1


Type URL
Binary Package perl-Device-PiLite-0.01-alt1.noarch.rpm
Source Package perl-Device-PiLite-0.01-alt1.src.rpm

Install Howto

  1. Add the following line to /etc/apt/sources.list:
    rpm [Sisyphus] noarch autoimports
    rpm [Sisyphus] noarch autoimports
  2. Update the package index:
    # sudo apt-get update
  3. Install perl-Device-PiLite rpm package:
    # sudo apt-get install perl-Device-PiLite



See Also

Package Description
perl-Device-Plugwise-0.5-alt1.noarch.rpm Perl module to communicate with Plugwise hardware
perl-Device-Plugwise-scripts-0.5-alt1.noarch.rpm Device-Plugwise scripts
perl-Device-Power-Synaccess-NP05B-1.03-alt1.noarch.rpm Manage and monitor the Synaccess NP-05B networked power strip
perl-Device-ProXR-0.07-alt1.noarch.rpm A Moo based object oriented interface for creating controlling devices using the National Control D
perl-Device-ProXR-scripts-0.07-alt1.noarch.rpm Device-ProXR scripts
perl-Device-Quasar3108-0.04-alt1.noarch.rpm Control Quasar Electronics Serial I/O Module
perl-Device-RAID-Poller-0.1.2-alt1.noarch.rpm Basic RAID status poller, returning RAID disk devices, types, and status
perl-Device-RAID-Poller-scripts-0.1.2-alt1.noarch.rpm Device-RAID-Poller scripts
perl-Device-RFXCOM-1.163170-alt1.noarch.rpm Perl modules for RFXCOM RF receivers and transmitters
perl-Device-RFXCOM-scripts-1.163170-alt1.noarch.rpm Device-RFXCOM scripts
perl-Device-RadioThermostat-0.04-alt1.noarch.rpm Access Radio Thermostat Co of America (3M-Filtrete) WiFi thermostats
perl-Device-Regulator-Plasmatronic-0.03-alt1.noarch.rpm perl module Device-Regulator-Plasmatronic
perl-Device-Router-RTX-0.06-alt1.noarch.rpm interact with Yamaha RTX routers
perl-Device-SCSI-1.004-alt1.noarch.rpm Perl module to control SCSI devices
perl-Device-ScanShare-1.014-alt1.noarch.rpm manage USERDIRTS.TXT ecopy file to manage scanner device options